Support for MFC-9120CN
- Out of Memory
- No Paper
- Belt End Soon
- No Waste Toner
- I keep getting the error message "Authenticate Err (Authentication error)".
- No Belt Unit
- Jam Inside
- Jam Tray
- When I send a fax from the machine, an error "not register." or "not registered." is displayed.
- I just replaced the toner cartridge and the LCD continues to display the message "Toner Life End" or "Replace Toner".
- Toner Low
- Drum Error (Drum!)
- Document Jam
- Clear the message "Awaiting Redial"
- I still receive the error message "Replace Drums", "Replace Drum(X)", "Drums End Soon", or "Drum End Soon(X)" after I replace the drum unit with a new one.
- Why does the message "No Response/Busy" appear on my Transmission Verification Report?
- WT Box End Soon
- Size mismatch
- Drums End Soon/ Drum End Soon(X)
- Jam Rear
- What does "COMM.ERROR" on the LCD display mean? Show More Show Less
- The error message "Invalid format for short nick name" appears when printing a document. (Mac OS X 10.5 or greater)
- When I try to scan to OCR I get an error message saying "This feature is not available because there is no OCR Software installed".
- I'm trying to install the driver with network settings, but the installation wizard is not able to locate the Brother machine on my network, I'm getting the message "No devices could be found over the network".
- My Antivirus Software gives a warning message during the installation of Web BRAdmin.
- The Error message "A file required cannot be found.(CC035)" appears when I click "Remote Setup" or "Quick-Dial" button from ControlCenter2. (For Macintosh)
- I cannot scan via network getting the error "CC031" or "MTW012". (Mac OS X)
- When I start the Remote Setup Software, the error message "RS 005-xx" or "RS 006-xx" appears on the display.
- When I try to scan using ControlCenter4 or ControlCenter3 for Windows, I receive the error message "Error CC3-202.", "Error CC4-202", "Error CC3-205" or "Error CC4-205.
- The error message "An error occurred during the installation. ... . IS015- GetOsVersion - 1" appears when installing the Full Driver & Software Packages for Windows 7 downloaded from the "Download" section.
- I am using Safari in Mac OS X. When I created a CSR or a Self-signed Certificate using the IP address to configure the "Common Name" and I try to access the Print Server using Safari with SSL communication, Safari issues an alert.
- The message "[file name] can't be opened because it is from an unidentified developer." appears on OS X v10.8.x.
- The error message "IS052 InstallNetworkDriver" appears when installing the MFL-Pro Suite from the CD-ROM or the Full Driver & Software Package is downloaded from the "Download" section.
- I cannot use the Scan to E-mail with Outlook2003 or Outlook2007 after updating ControlCenter3. The error message "command line argument is invalid" appears. What can I do?
- When I install the drivers, Norton AntiVirus displays a Security Alert that a medium risk application "[file name].exe is attempting to connect to a DNS server".
- When scanning to OCR from ScanSoft™ PaperPort™ 11SE, the following error message appears: "System error incurred in external Link module EZText.g32. The OCR server is unable to process the document". I have Windows XP Service Pack 2 (SP2) installed.
- When I run the Firmware update tool or the I-FAX install tool, the "Program failed to run" message appears on my PC screen. What do I do?
- How do I clear the message "MFC is Busy" or "Connect Failure"?
- I get an error "Print Queue is stopped". (Mac OS X 10.2 - 10.4) Show More Show Less
Other FAQs Category
A guide to navigating our most common questions